Hello world

Learn how to collect IoT device data using MQTT, HTTP or CoAP and visualize it on a simple dashboard. Provides variety of sample scripts that you can run on your PC or laptop to simulate the device.

mqtt http coap visualization helloworld

Getting started with Rule Engine

Learn about IoT Hub rule engine and typical use cases you can implement. Review Hello World example and learn how-to enable filtering of incoming telemetry messages.

device management attributes

Connect devices using IoT Hub HTTP API

Learn how to connect your devices using HTTP protocol and IoT Hub built-in payload format.

http connect

Connect devices using IoT Hub MQTT API

Learn how to connect your devices using MQTT protocol and IoT Hub built-in payload format.

mqtt connect

Connect devices using IoT Hub LwM2M API

Learn how to connect your devices using LwM2M protocol and IoT Hub built-in payload format.

lwm2m connect

Connect devices using IoT Hub CoAP API

Learn how to connect your devices using CoAP protocol and IoT Hub built-in payload format.

coap connect

IoT Hub Integrations basics

Learn about IoT Hub Integrations feature and how you can use it to connect devices and apps that use custom payload formats.

IoT Hub Integrations vs IoT Gateway

Learn the differences between the Platform Integrations and IoT Gateway.

Connect devices with custom payload using IoT Hub HTTP Integration

Convert existing protocols and payload formats to IoT Hub message format.

http connect

Connect devices with custom payload using IoT Hub MQTT Integration.

Connect to external brokers and consume MQTT data stream

mqtt connect

Connect SigFox devices using IoT Hub Integration

Learn how to route messages from Sigfox backend to IoT Hub and decode binary device payloads.

sigfox connect

Connect LoRaWAN devices using TheThingsNetwork

Learn how to route messages from TheThingsNetwork backend to IoT Hub and vise-versa.

ttn connect

Connect OPC-UA servers to IoT Hub

Learn how to connect OPC-UA devices to IoT Hub.

opcua connect

Connect LoRaWAN devices using Actility ThingPark

Learn how to route messages from ThingPark to IoT Hub and vise-versa.

Connect devices through AWS IoT

Learn how to connect to AWS IoT broker, transform the incoming messages and generate the downlinks using IoT Hub.

Connect devices through AWS Kinesis

Learn how to connect to AWS Kinesis stream, transform the incoming messages and generate the downlinks using IoT Hub.

Connect devices through IBM Watson IoT

Learn how to connect to IBM Watson IoT broker, transform the incoming messages and generate the downlinks using IoT Hub.

Connect devices through Azure Event Hub

Learn how to connect to Azure Event Hub, transform the incoming messages and generate the downlinks using IoT Hub.

Connect devices through Azure IoT Hub

Learn how to connect to Azure IoT Hub and transform the incoming messages using IoT Hub.

Devices uses TCP protocol

How to connect to IoT Hub TCP-server, transform the incoming messages and generate the downlinks using IoT Hub.

Connect TCP devices

Devices uses UDP protocol

How to connect to IoT Hub UDP-server, transform the incoming messages and generate the downlinks using IoT Hub.

Connect UDP devices

Validate incoming telemetry

Learn how to configure Rule Engine to discard invalid telemetry readings based on JavaScript filter function.

Telemetry delta calculation

Learn how to configure Rule Engine to calculate telemetry delta readings based on Originator telemetry rule node.

Data function based on telemetry from 2 devices

Learn how to configure Rule Engine to create new telemetry based on telemetry readings from multiple devices.

Transform incoming telemetry

Learn how to configure Rule Engine to transform incoming telemetry based on JavaScript function before it is stored to the database.

Transform telemetry using previous record

Learn how to configure Rule Engine to calculate “delta” of the counter readings based on current and previous reading.

Create & clear alarms

Learn how to configure Rule Engine to create and clear alarms based on incoming data from devices.

Working with Alarm details

Learn how to configure Alarm Details function in Alarm nodes and how to add an Alarm widget to the dashboard.

Send email on alarm

Learn how to configure Rule Engine to send email when new alarm is created.

Send email to customer

Learn how to configure Rule Engine to send email to the customer of the assigned device.

Notifications and Alarms on your smartphone using Telegram Bot

Learn how to configure Rule Engine to send notification using Telegram Bot when new alarm is created.

Create alarm when the device is offline

Learn how to create an alarm when the device is offline for a certain period of time using RuleEngine.

Check relation between Entities

Learn how the Check Relation node can be used to check the relation between Entities.

RPC Request to related Device

Learn how to send a remote request call to a Related Device using Rule Engine.

Using REST API to get weather data

Learn how to use REST API to get weather data in a specified location.

Add & remove devices to group dynamically

Learn how to how to dynamically add & remove device from the device group based on incoming data from device.

Send data to external MQTT brokers

Connect to external brokers and send MQTT data stream

Using queues for synchronization

Learn how to use Rule Engine 2.5 queues for message processing synchronization.

Using queues for message reprocessing

Learn how to use Rule Engine 2.5 queues for message reprocessing in case of failure or timeout.

Aggregate incoming data stream

Calculate total water consumption in the building based on readings from multiple water meters within a building.

aggregation water meter analytics rule engine

Aggregate latest telemetry values periodically

Calculate average temperature in the warehouse based on readings from multiple temperature sensors.

average temperature analytics rule engine

ESP32 OTA using IoT Hub

Learn how to make ESP32 OTA update using IoT Hub custom widget, rule chain and dashboard

ESP32 Pico Kit GPIO control and DHT22 sensor monitor using IoT Hub Arduino SDK

Contains wiring diagram, sketch and dashboard setup guide.

Temperature upload over MQTT using Arduino UNO, ESP8266 and DHT22 sensor

Contains wiring diagram, sketch and dashboard setup guide.

Humidity and temperature upload over HTTP using Arduino UNO, SIM808 Shield and HTU21D sensor

Contains wiring diagram, sketch and dashboard setup guide.

Temperature upload over MQTT using ESP8266 and DHT22 sensor

Contains wiring diagram, sketch, dashboard setup guide and demonstration video.

ESP8266 GPIO control over MQTT using IoT Hub

Contains wiring diagram, sketch, dashboard setup guide and demonstration video.

Temperature upload over MQTT using NodeMCU and DHT11 sensor

Contains wiring diagram, sketch and dashboard setup guide.

Raspberry Pi GPIO control over MQTT using IoT Hub

Contains wiring diagram, source code, dashboard setup guide and demonstration video.

Raspberry Pi GPIO control using Android Things and IoT Hub

Contains wiring diagram, source code, dashboard setup guide and demonstration video.

Temperature upload over MQTT using Raspberry Pi and DHT22 sensor

Contains wiring diagram, sketch, dashboard setup guide and demonstration video.

GPS data upload and visualization using LinkIt ONE and IoT Hub

Contains wiring diagram, sketch and dashboard setup guide.

Learn how to connect your SODAQ Universal Tracker to IoT Hub

Learn how to connect your SODAQ Universal Tracker to IoT Hub via T-Mobile – IoT CDP Integration.

NB IoT, NB-IoT, T-Mobile, SODAQ, 5G

Learn how to connect your SODAQ Universal Tracker to IoT Hub

Learn how to connect your SODAQ Universal Tracker to IoT Hub via UDP Integration.

NB IoT, NB-IoT, T-Mobile, SODAQ, 5G

IoT Hub BLE Demo with Raspberry PI, ESP32, Xiaomi MI and HTU21D sensors

Contains wiring diagram and dashboard setup guide.

Temperature upload over MQTT using Nettra RTU

Contains wiring diagram and dashboard setup guide.

Connectivity status

Learn how to track connectivity status of the devices: connected, disconnected, active, inactive

Audit log

Learn how to track user actions in order to keep audit log.

White-labeling

Learn how to configure your company or product logo and color scheme in 2 minutes with zero coding efforts.

Device and Asset groups

Learn how to work with entity groups and perform bulk operations

Scheduler

Learn how to schedule various types of events and trigger actions.

Reporting

Learn how to schedule and generate reports based on existing dashboards.

Widgets Development Guide

Learn how to customize and create custom widgets